Download Datasheet

Measuring Principle
Radar technology: 80 GHz or 180 GHz (order option)
Transmission power: Peak <1.5 mW / Average <70 µW

Measuring Range (80 GHz, by process connection)
M24: Max. 10 m (33 ft)
MNPT/G ¾: Max. 10 m (33 ft)
G 1: Max. 10 m (33 ft)
MNPT/G 1½: Max. 15 m (49 ft)
Tri-Clamp 1½: Max. 15 m (49 ft)
Tri-Clamp 2: Max. 15 m (49 ft)

Measuring Range (180 GHz, by process connection)
MNPT/G ½: Max. 10 m (33 ft)
M24: Max. 10 m (33 ft)

Output Signal
4 to 20 mA HART, 2-wire
Operating modes: 4-20.5 mA / NAMUR NE43: 3.8-20.5 mA (factory) / US mode: 3.9-20.5 mA
Failure alarm: Max. 21.5-23 mA / Min. <3.6 mA (factory)

Power Supply
Supply voltage: DC 12 to 30 V
Power consumption: Max. current limited to 500 mA (non-hazardous) / Ii = 100 mA (Ex ia)
HART load: Min. 250 Ω

System Integration
Protocol: HART 7.6
Manufacturer ID: 17 (0x0011)
Device type ID: 0x11C6
Bluetooth range: Up to 25 m (82 ft); operating radius with intervisibility 10 m (33 ft)

Environmental Conditions
Ambient temperature (MNPT/G½, M24, Tri-Clamp, NEUMO BioControl): -40 to +80°C (-40 to +176°F)
Ambient temperature (MNPT/G¾, MNPT/G1½, G1): -40 to +80°C (-40 to +176°F)
Storage temperature: -40 to +85°C (-40 to +185°F)
Operating altitude: Up to 5000 m (16,404 ft) above sea level
Degree of protection: IP66/68/69, NEMA type 4X/6P (IP68: 1.83 mH2O for 24h)
Pollution degree: 2 (per IEC/EN 61010-1)
Vibration resistance: 1.25 (m/s²)²/Hz (~5g), 5-2000 Hz
Shock resistance: 30 g (18 ms), all 3 axes

Process Conditions
Process temperature: -40 to +150°C (-40 to +302°F), depending on connection/seal
Process pressure: -1 to +20 bar (-14.5 to +290 psi) (varies by connection)
Dielectric constant: εr ≥ 1.2 (liquids) / εr ≥ 1.6 (bulk solids)

Process Connections
MNPT/G ½ (180 GHz, PTFE antenna)
MNPT/G ¾, MNPT/G 1½, G1 (80 GHz, PEEK antenna)
M24 (80 GHz PEEK / 180 GHz PTFE)
Tri-Clamp NA Connect ISO2852 DN25-38 (1½”) / DN40-51 (2″)
NEUMO BioControl D50 PN16

Seal Materials
FKM, EPDM, PTFE cladding, PEEK cladding (depending on connection)

Certificates and Approvals
CE mark
Acceptance test certificate 3.1 (EN10204)
Hygienic certificates: 3-A, EHEDG, ASME BPE, USP Class VI