Download Datasheet

Resolution: 8,192 steps; 65,536 revolutions; 29 bit

Shaft design: Solid shaft

Shaft diameter: 6 mm

Function principle: Absolute

Revolution type: Multiturn

Detection system: Magnetic

Active operating temperature: -40…85°C

Operating voltage: 8…36 V DC

Current consumption: < 60 mA at 24 V DC

Power consumption: 1.5 W

Protection class: III

Reverse polarity protection: Yes

Overvoltage protection: Yes; < 60 V DC

Power-on delay time: < 2 s

Contact rating: Max. 1.5 A at 24 V DC

Code: Binary

Safety accuracy: 0.5°

Non-safety accuracy: 0.2°

Repeatability: ±0.1°; magnetic

Response time to safety request: 7 ms

Parameter setting options: Scaling, preset, baud rate, node ID, gear function, monitoring window, counting direction, speed parameters, integration time, ifm mode

Number of CAN interfaces: 2

Transmission rate: 20 kbit/s…1 Mbit/s

Terminating resistor: Yes; external M12, e.g. E11590

CAN protocol: CANopen, CANopen Safety, CAN Specification 2.0A

Factory baud rate: 250 kbit/s

Factory node ID: 32

CAN versions: CiA 406 V4.1.0; CiA 301 V4.2.0; CiA DSP-305 V3.0.0 LSS; EN 50325-4; EN 50325-5; ISO 11898

Ambient temperature: -40…85°C

Storage temperature: -40…90°C; dry conditions

Maximum relative air humidity: 98%

Maximum altitude above sea level: 5,000 m

Protection rating: IP65; with the ifm socket properly screwed on

EMC – ESD according to IEC 61000-4-2: 6 kV contact discharge / 15 kV air discharge

EMC – HF radiated according to IEC 61000-4-3: 20 V/m at 27…1,000 MHz; 10 V/m at 1,000…2,000 MHz; 3 V/m at 2,000…6,000 MHz

EMC – Burst according to IEC 61000-4-4: 4 kV

EMC – Surge according to IEC 61000-4-5: 2 kV, shield

EMC – HF conducted according to IEC 61000-4-6: 20 V

EMC – Radio interference according to IEC 55011: Class B

Magnetic field resistance according to IEC 61000-4-8: 30 A/m at 50 Hz / 1,000 A/m at 0 Hz

Conducted immunity according to ISO 7637-2 and ISO 16750-2: 12 V / 24 V

Vibration resistance according to IEC 60068-2-6: 15 g at 15…2,000 Hz; 1 octave/minute in 3 axes

Broadband noise according to IEC 60068-2-64: 15 g at 50…2,000 Hz; 1 hour per axis; 1 octave/minute

Shock resistance according to IEC 60068-2-27: 100 g, 6 ms half-sine; 100 shocks in every direction of the 3 coordinate axes

Salt spray resistance according to IEC 60068-2-52: Severity level 5

Safety classification according to ISO 13849-1: Category 3, PL d

Safety classification according to IEC 61508: SIL 2

Compliance: IEC 61800-5-2 and IEC 61800-5-3

Mission time TM: 175,800 hours

Additional mission time: 20 years

Probability of dangerous failure per hour (PFH): 2.00 × 10⁻⁸ 1/h

Weight: 476.85 g

Dimensions: Ø58 mm / L = 76.1 mm

Housing material: Aluminium

Flange material: Aluminium

Seal material: NBR / HNBR

Display material: UV-stabilised polycarbonate

Connection material: Nickel-plated die-cast zinc, axial/radial

Maximum mechanical revolution speed: 6,000 rpm

Maximum starting torque: 0.05 Nm

Reference temperature for torque: 20°C

Shaft material: Stainless steel 303 / 1.4305

Maximum axial shaft load at shaft end: 80 N

Maximum radial shaft load at shaft end: 100 N

Fixing flange: Clamping flange; Ø58 mm

Preoperational mode indicator: Green flashing LED

Operational mode indicator: Green LED

Error message indicator: Red flashing LED

Mounting material: Not included; fixing must be performed by the user

Application suitability: Suitable for earthmoving and construction machines and industrial trucks

Shaft load measurement point: 10 mm from the flange

Safety application: Suitable for applications up to Ag PL d according to ISO 25119

Pack quantity: 1 pc.

CAN-in connector: 1 × M12; A-coded; 5 contacts

CAN-out connector: 1 × M12; A-coded; 5 contacts

Connector protection: Open M12 connections must be covered with suitable protective caps